Galvanized steel two wave fence guardrail production line
Main datas
This machine is use for producing highway fence panel, which can
roll up to 4mm raw material( coil), it is fully automatic from
feeding to punching to roll forming to cutting, it have around 24
roller stations, the main technical datas are as follows,
| 1 | Material Width | 500-1000mm |
| 2 | Effective Width | 480-680mm |
| 3 | Thickness of Coil | 3-4mm |
| 4 | Application | Highway Guardrail |
| 5 | Estimated Dimension | 15000mmX1800mmX1200mm |
| 6 | Total Weight | 15 Tons |
| 7 | Main Power | 30 KW |
| 8 | Decoiler | Manual or Hydraulic Decoiler |
| 9 | Inner Diameter | 508mm |
| 10 | Outer Diameter | 1200mm |
| 11 | Loading Weight | 15T |
| 12 | Forming Speed | 6—10m/min |
| 13 | Forming Station | 12-15 |
| 14 | Bracket | Welded with 36 # I-steel |
| 15 | Material of Shaft | High Grade 45# Steel with 1st Rough Finished and then 2th Refined Finished |
| 16 | Diameter of the Roll | 100mm |
| 17 | Material of Roller | High Quality CGr15 Quenched HRC58-62 ° |
| 18 | Processing Technology | Rough Processing ---Refined Processing--Hard Chromium Plating. |
| 19 | Material of Rack | Complete Welded Structure of A3 Steel Plate 20 mm Thickness |
| 20 | Transmission | Chain or Gear Box |
| 21 | Material of cutting blade | Cr12 with Quenched Treatment 60-62 ° |
| 22 | Cutting system | Hydraulic Stop or Tracking Cutting |
| 23 | Voltage | 380V/50HZ/3 Phase or as Customer Require |
Working flow of the machine
Hydraulic uncoiler—Feeding—Leveling-- hydraulic punching—Roll
forming—Hydraulic cutting—output table
Components of the machine
Hydraulic uncoiler------------------------------------------1 set
Leveling------------------------------------------------------1 set
Servo feeding-----------------------------------------------1 set
Hydraulic punching-----------------------------------------1 set
Roll former---------------------------------------------------1 set
Hydraulic cutting--------------------------------------------1 set
Output table-------------------------------------------------1 set
After sale services
1). Engineer will give free training lessons to labors in buyer’s
factory.
2). The Buyer will buy the round-trip air ticket for Engineer if
visa application is approved. The buyer is also responsible to bear
expenses generated, e.g. visa formalities, meals, accommodation and
allowance of USD80 for engineer.
3). During this guarantee period, we will provide spare parts
without any charge in case of quality discrepancy caused by us. If
the malfunctions are caused by your incorrect operations, we will
provide the buyer spare parts at cost price.
We will charge the buyer cost price of spare parts beyond one year
and provide long-term technical guide.
Machine pictures
